 |
|
|
|
|
|
 |
product search | request literature | contact us |
|
|
 |
|
|
|
|
|
|
| home > products > hedland > variable area high pressure flow meters > air & compressed gases |
AIR & COMPRESSED GASES |
|
|
|
|
|
Basic Flow Meter |
|
Test Kit |
|
Flow-Alert
Micro Switch |
|
Flow-Alert
Reed Switch |
|
MR Flow Transmitter |
|
|
Downloads
|
|
Basic Flow Meter
|
Flow ranges: 0.5 - 5.0 SCFM (0.2 - 2.2 L/SEC)
up to 200 - 2200 SCFM (75 - 1130 L/SEC) |
| Construction: Aluminum, brass and T303 stainless steel |
| Sizes: 1/4 to 3 inch ports |
| Ports: SAE, NPTF and BSPP |
| | Pressure up to 1,000 psi (69 bar) maximum |
| Temperature up to 240 °F (116 °C) |
| Accuracy ±2% full scale |
| Repeatability ±1% |
| Standard calibration: 1.0 specific gravity |
| Direct reading |
| Install in any position |
| 360° rotatable guard/scale |
| Easier to read linear scale |
| No flow straighteners or special piping required |
| Relatively insensitive to shock and vibration |
| Optional:
- Special scales available
- EP option, extended inlet cap with plugged pressure gauge port
- EG option, extended inlet cap with pressure gauge installed |
|
|
Basic Flow Meter |
|
Test Kit |
|
Flow-Alert
Micro Switch |
|
Flow-Alert
Reed Switch |
|
MR Flow Transmitter |
|
|
Downloads
|
|
Test Kit
|
Flow ranges: 0.5 - 5.0 SCFM (0.2 - 2.2 L/SEC)
up to 100 - 1000 SCFM (50 - 475 L/SEC) |
| Construction: Aluminum, brass and T303 stainless steel |
| Sizes: 1/4 to 1-1/2 inch ports |
| Ports: NPTF and BSPP |
| | Pressure up to 600 psi (41 bar) maximum |
| Temperature up to 240 °F (116 °C) |
| Accuracy ±2% full scale |
| Repeatability ±1% |
| Standard calibration: 1.0 specific gravity |
| Direct reading |
| Install in any position |
| 360° rotatable guard/scale |
| Easier to read linear scale |
| No flow straighteners or special piping required |
| Relatively insensitive to shock and vibration |
| | Brass ball valve with chrome-plated brass ball and Teflon® seals
| | | Pressure gauge, glycerin dampened:
0 – 160 psi (0 – 10 bar) |
| Includes:
- Basic flow meter
- Control valve
- Pressure gauge |
| Optional:
- Special scales available
- Silencer |
|
Teflon is a registered trademark of
E.I.DuPont de Nemours & Co. |
|
|
Basic Flow Meter |
|
Test Kit |
|
Flow-Alert
Micro Switch |
|
Flow-Alert
Reed Switch |
|
MR Flow Transmitter |
|
|
Downloads
|
|
Flow-Alert™ Micro Switch
|
Automatically signals alarm if flow is too high or too low |
| Automatically opens or closes electrical circuits |
| Triggers warning lights, buzzers and other devices |
| Shuts down pumps and/or other equipment to protect your operation against permanent damage |
| Install in any position |
| Easier to read linear scale |
| No flow straighteners or special piping required |
| Relatively insensitive to shock and vibration |
| Temperature up to 240 °F (116 °C) |
| | Pressure up to 1,000 psi (69 bar) maximum |
| Accuracy ±2% full scale |
| Repeatability ±1% |
| Standard calibration: 1.0 specific gravity |
| Construction: Aluminum, brass and T303 stainless steel |
| | Flow ranges: 0.5 - 5.0 SCFM (0.2 - 2.2 L/SEC)
up to 100 - 1000 SCFM (50 - 475 L/SEC) |
| | Sizes: 1/4 to 1-1/2 inch ports |
| | Ports: SAE, NPTF and BSPP |
| Housing: Anodized and epoxy-coated aluminum with polycarbonate lens |
| Rating: NEMA 12 and 13 (IP52/54) |
| | Micro Switch: Single(1) or Double(2) prewired single-pole, double-throw (SPDT) |
| Connection: Pig-tail conductor (standard) with water-tight strain relief |
| Includes: Basic flow meter with Flow-Alert flow switch |
| | Optional: Special scales available |
|
|
Basic Flow Meter |
|
Test Kit |
|
Flow-Alert
Micro Switch |
|
Flow-Alert
Reed Switch |
|
MR Flow Transmitter |
|
|
Downloads
|
|
Flow-Alert™ Reed Switch
|
No mechanical linkage |
| Provides output to signal alarm if flow is too high or too low |
| | Flow ranges: 0.5 - 5.0 SCFM (0.2 - 2.2 L/SEC)
up to 100 - 1000 SCFM (50 - 475 L/SEC) |
| Construction: Aluminum, brass and T303 stainless steel |
| | Sizes: 1/4 to 1-1/2 inch ports |
| | Ports: SAE, NPTF and BSPP |
| | Pressure up to 1,000 psi (69 bar) maximum |
| Temperature up to 240 °F (116 °C) |
| Accuracy ±2% full scale |
| Repeatability ±1% |
| Standard calibration: 1.0 specific gravity |
| Install in any position |
| Easier to read linear scale |
| No flow straighteners or special piping required |
| Relatively insensitive to shock and vibration |
| Housing: Anodized and epoxy-coated aluminum with polycarbonate lens |
| Rating: NEMA 12 and 13 (IP52/54) |
| | Reed switch options: Single(1) or Double(2) prewired single-pole, single-throw (SPST-NO) normally open or single-pole, single-throw (SPST-NC) normally closed |
| Connection: 4 pin (Protection Class IP65) |
| Includes: Basic flow meter with Flow-Alert flow switch |
| | Optional: Special scales available |
|
|
Basic Flow Meter |
|
Test Kit |
|
Flow-Alert
Micro Switch |
|
Flow-Alert
Reed Switch |
|
MR Flow Transmitter |
|
|
Downloads
|
|
MR Flow Transmitter
|
Operate as part of a totally integrated electronic process control/data acquisition system |
| Digital flow rate and total flow indication |
| Proportional analog outputs for electronic integration | |
| Non-contact sensor electronics |
| In-field compensation for — specific gravity, pressure and temperature |
| Flow ranges: 3 - 25 SCFM (2 - 12 L/SEC)
up to 100 - 1000 SCFM (50 - 475 L/SEC) |
| Construction: Aluminum, brass and T303 stainless steel |
| Sizes: 1/4 to 1-1/2 inch ports |
| Ports: SAE, NPTF and BSPP |
| Pressure up to 1,000 psi (69 bar) maximum |
| Temperature up to 240 °F (116 °C) |
| Accuracy ±2% full scale |
| Repeatability ±1% |
| Standard calibration: 1.0 specific gravity |
| Install in any position |
| No flow straighteners or special piping required |
| Insensitive to shock and vibration |
| Temperature up to 240 °F (116 °C) |
| Pressure up to 1,000 psi (69 bar) maximum |
| Housing: Anodized and epoxy-coated aluminum with polycarbonate lens |
| Rating: NEMA 12 and 13 (IP 52/54) |
| Connection: 4-pin |
| Electrical: Loop powered on 4–20 mA current |
| Output: Factory calibrated, field selectable 4–20 mA, 0–5 Vdc and 0–10 Vdc |
| CE compliant — exceeds US and meets European standards for EMI/EMC |
| US Patent 7,130,750 |
| Includes: Basic flow meter with flow transmitter output |
|
|
|
|
|
|
|
|
 |
